EW Shelter "AB" series

For cars, rapid deployment

All antennas in a protected box

Mounting on magnets/railings

Minimum signal loss

TECHNICAL SPECIFICATIONS

Power Supply
● Built-in battery (optional)● Charging from 220V AC mains● Operation from 12V and 24V vehicle power systems(supplied power cable with terminal clamps or alligator clips)● Power consumption — up to 1300 W● Built-in overload protection fuses
Antennas and Signal Transmission
● Purpose-specific antennas: cloverleaf or patch antennas (in a protective enclosure)● Use of professional RG402 and RG405 coaxial cables (minimized signal power loss)● 50W (100W) modules with circulator and GaN technology● Up to 20 operating frequency bands in a single unit● Ability to switch each frequency band on individually● Visual indication of active jamming sub-bands
Cooling and Protection
● Dust- and moisture-protected active cooling system● Heat sinks positioned along the entire length of the frequency generation modules● Overheating protection during prolonged continuous operation
Mounting and Dimensions
● Vehicle roof box with magnetic mounting or attachment to vehicle roof rails● EW vehicle box dimensions: 134 × 86 × 37 cm

100-200 mdistance at 50-100 m. height (depending on the type of antennas, blocking range and distance to the operator 1-2 km.)

200-300 m(with patch antenna vs. Mavic)

Effective tested range

at the specified operating ranges of 100 m tested under the following conditions:

Remote control with a power of 1W, distance of 1 km. direct visibility of the drone and orientation to the drone, location of the EW system (with clover antennas) in an open area also without obstacles, module power 50W for the 100 MHz range.

Result: loss of control of the drone 100 m. from the EW system. Under similar conditions with a patch antenna when working against the Mavic – 300 m.